B-DETETCTION PLUS m (mobile)

Bauer B-DETETCTION PLUS m
Mobile version for temporary measurement of: CO, CO², O², absolute humidity and VOCs (VOCs = volatile organic compounds)

Standard scope of delivery:
B-DETECTION PLUS m in a handy case
Pressure reduction for inlet pressure B-Detection system
Gas sampling unit for direct measurement from the breathing air cylinder, compressor or intake air
Dew point sensor incl. drying capsule, PID sensor, rechargeable battery,

SYSTEM LIMITS
Maximum system pressure 350 bar
Maximum permissible compressor delivery rate 850 l/min
Permissible operating temperature +5°C... +45°C

MEASUREMENT PRINCIPLE
CO2 Non-dispersive infrared spectroscopy (NDIR)
CO, O2 electrochemical
Absolute humidity above dew point
VOC (residual oil) Photoionization detector (PID)
MEASURED VARIABLES AND MEASUREMENT ACCURACY 3
CO2 0... 2,000 ppm ± 2.5 % of the measuring range end value
CO 0 ...25 ppm ± 2 % of the measuring range end value
O2 0 % - 40 % ± 1 % of the measuring range end value
Dew point -70...+60°C or 10 ... 40,000 ppm ± 2°C or 1 ppm + 20% of the display value
VOC (residual oil) 0... 1 ppm (related to calibration gas isobutene)

FURTHER TECHNICAL DATA
Integrated operating voltage: 24 VDC; stand-alone; 100-250 VAC, 50/60 Hz
Flow rate 1.0 ... 3.0 l/min
Weight 8.9 kg
Dimensions W × H × D [mm] 464 x 366 x 180
SYSTEM TEST/CALIBRATION
Visual and leak test once a month
Function check at least every 3 months with test gas
System check once a year
Calibration of dew point sensor: every 24 months